Led Video Processor LS-VXP4K 

 

Với sự phổ biến của bộ xử lý video 4K trở thành yêu cầu mới trên thị trường. Listen Vision cũng nhanh chóng tham gia thị trường với model:  LS- VXP4K cũng  là bộ chuyển đổi video chuyên nghiệp mới và ghép nối video theo yêu cầu mới của khách hàng. VXP4K là dòng sản phẩm cao cấp nhất của listen hiện nay, hỗ trợ đa ngõ vào với độ phân giải 4k,60 khung hình trên giây. Ngõ ra kiểm soát màn hình LED lên tới 10 triệu điểm ảnh với 8 đường DVI (4 backup)

● Hỗ trợ DP1.2, HDMI1.4, HDMI2.0, 4K @ 60Hz input
● Hỗ trợ EDIDM anagement, tiêu chuẩn 2K hoặc 4K @ 60HZ
● Hỗ trợ bất kỳ độ phân giải tùy chỉnh nào với bất kỳ siêu rộng và cực cao
● Hỗ trợ tín hiệu chuẩn 2K và 4K chuyển đổi liền mạch với bản xem trước
● Hỗ trợ đầu vào video 2K chuẩn
● Hỗ trợ 4 đầu ra dự phòng
● Hỗ trợ thiết kế mô-đun tùy chọn
● Hỗ trợ điều khiển trung tâm với giao thức mở

 

Thông số kỹ thuật chi tiết bộ xử lý hình ảnh 4k: (vui lòng xem bảng tiếng anh)

 

1.   Product Features led video processor vxp4k:

 

● Support DP1.2，HDMI1.4，HDMI2.0，4K@60HZ input

● Support EDID Management, standard 2K or 4K@60HZ, pixel to pixel mapping

● Support any customized resolution with any ultra-wide and ultra-high

● Support standard 2K and 4K signals seamless switching with preview

● Support standard 2K video input

● Support 4 backup output

● Support optional module design

● Support central control with open protocol

 

 

2.   Hardward Overview LS-vxp4k

              Front Panel

 

OLED Display

1	It displays current status of the device, and provides interactive choices in conjunction with buttons on the front panel.

Rotary Button

2	This button uses for menu selections and confirmation.

Button

3	SAVE Button: It uses for saving the setting into mode, use LOAD Button to cooperate. Press SAVE button, then M1\M2\M3\M4\E\F\G\H\DVI3\DVI4 Button changes into silk-screen 1\2\3\4\5\6\7\8\9\0 SAVE channels. Press any one to save current setting into that channel.
4	Split button: Split function button It uses for selecting split mode and split parameter setting.
5	MENU Button: Menu and return previous page button It uses for entering into MENU and corresponding Menu function. Repress the MENU will come back to previous Menu.
6	Scale Button: It uses for size and position adjusting, working in with M1\M2\M3\M4\E\F\G\H\DVI3\DVI4 Button Silk-screen 1\2\3\4\5\6\7\8\9\0, or change the size and position by knob.
7	Input Area: Input signals choice button It uses for input signals, the user can choose the signals lights. When there are more than two signal inputs, the flashing red light means that the signal is in output. When setting output resolution or scaling, M1\M2\M3\M4 changes to number 1\2\3\4.
8	Layer area: Layer choice button This device has 8 layers at most, which uses for adjusting scaling of layer and signal. When choosing one of the layer, scaling the layer using SCALE button; press the signal at this time, which means the layer choose the signal. When setting resolution or scaling, E\F\G\H changes to number 5\6\7\8.
9	OUTPUT Area: Output port choice button It uses for adjusting the scaling and layer of each output. When choosing the layer with layer, the user can add the layer image into the output, at the meanwhile, the user can add more than one layer in one output to realize multiple pictures.
10	TAKE Button: Effect taking button It uses for taking the previewed image to main output when in preview mode.
11	LOAD button: Load the templates in SAVE button. When pressing LOAD button, M1\M2\M3\M4\E\F\G\H\DVI3\DVI4 button changes into 1\2\3\4\5\6\7\8\9\0 SAVE channels. Press any button among them, will take the saved image effect into the output channel.

 

 Rear Panel

Control and Update Connectors

1	Connection used by RS 232, controlled by
6	Connection for product firmware upgrades.

Input Connectors

2	DUAL DVI Input Port Support 3840*2160@30HZ and 4K*1K\2K*1K input; support customize input
3	HDMI1.4 Input Port Support 3840*2160@30HZ and 4K*1K\2K*1K input; support customize input
4	HDMI2.0 Input Port Support 3840*2160@60HZ 3840*2160@30HZ and 4K*1K\2K*1K input; support customize input
5	DP1.2 Input Port Support 3840*2160@60HZ 3840*2160@30HZ and 4K*1K\2K*1K input;
17	Option input ports Support DVI\HDMI\CVBS\SDI\VGA\USB etc Input port option.

Output Connectors

7	DVI output port Different Split mode: When facing the display, Horizontal 1/4 split (The leftmost display), Vertical 1/4 split (The uppermost display) and the field split (the left top display).
8	DVI2 Output port Different Split mode: When facing the display, Horizontal 1/4 split (The second display from left), Vertical 1/4 split (The second display from top) and the field split (the right top display).
9	DVI3 Output Port Different Split mode: When facing the display, Horizontal 1/4 split (The third display from left), Vertical 1/4 split (The third display from top) and the field split (the left bottom display).
10	DVI4 Output Port Different Split mode: When facing the display, Horizontal 1/4 split (The fourth display from left), Vertical 1/4 split (The fourth display from top) and the field split (the right bottom display).
12	DVI1 Output backup port is same as DVI1 Output, which uses for sending card backup in general.
13	DVI2 Output backup port is same as DVI2 Output, which uses for sending card backup in general.
14	DVI3 Output backup port is same as DVI3 Output, which uses for sending card backup in general
15	DVI4 Output backup port is same as DVI4 Output, which uses for sending card backup in general

Power Connection

11	IEC- Power interface: AC 85-264V, 50/60HZ, max 45W.
16	Power Switch

 

1.   Operations

Menu Structure

Standard Output

Four Port Output

Preview Split

Multiple In Multiple Out

System Setting

Language

Output Resolution

The default output resolution is 1920*1080*60. If one sending card width is no more than 1920, height is not more than 1080, there is no need to do resolution setting. If the sending card resolution is more than 1920*1080, please set the resolution which is higher than sending card.

 

For example: If the user has 4 displays, which use 4 sending card, the resolutions are as below:

1728*768，2432*864，2432*864，1728*768

The device resolution should be higher than the sending card. Please note when choosing the resolution.

The width should choose the widest display, while above display is 2432;

The height should choose the highest display, while above display is 864.

So we choose the resolution 2560*960, as the width should be more than 2432 and the height should be more than 864.

 

Operation Steps:

Step 1:

Press MENU button, select the OUPUT and enter.

 

Step 2:

Please search the 2560*960 output resolution.

 

Step 3:

Select the resolution and revise, which needs around 10 seconds.

 

Step 4:

When the revised arrow disappears, press MENU to home page to check whether it succeeds.

Four Port Split

Four Port Split Mode: It is the split of DVI 1, DVI2, DVI3, DVI4 output port. DVI1 Output pot is the far left and uppermost screen. Horizontal 1/3 split is same as the Horizontal 1/4 parameter setting; while Vertical 1/3 split is same as the Vertical 1/3 parameter setting.

2:2 Splicing

If the user has 4 LED display, whose top left display is 1792*768, top right display is 1536*768, bottom left 1792*960, bottom right 1536*960, needs to setup split to 3328*1728.

 

 

Operation steps:

Step 1:

Choose Split Mode: Press Menu button, enter into 4 port split by knob and select field split. 

 

Step 2:

Choose the output resolution.( if any display is lower than 1920*1080, there is no need to operate this step). The top left display is 1792*768; the top right display is 1536*768; the bottom left display is 1792*960; the bottom right display is 1536*960. As any display width is no more than 1920, display height is no more than 1080, so the user no need to setup the output resolution.

Step 3:

After Field split setting, set total width to 3328.

 

Step 4:

Set the display total height to 1728.

 

Step 5:

Set the first display width to 1792.

 

Step 6:

Set the first display height to 768.

 

Step 7:

Confirmed to SAVE TO PORT to finish split setting.

 

There is no need to set the Second, third and fourth display, the device will calculate itself.

 

 

Horizontal 1/4 (Same as Horizontal 1/3)

If the user has 4 LED display 1344*1440, 1536*1440, 1536*1440, 1344*1440 （from left to right）, needs to setup split to 5760*1440

 

Operation steps:

Step 1:

Choose Split Mode: Press Menu button, enter into 4 port split by knob and select 1/4 horizontal split.

 

Step 2:

Choose the output resolution.( if the display is no more than 1920*1080, there is no need to operate this step). The screen height is 1440, so the user needs to setup 1536*1440 @ 60Hz.

 

Step 3:

After horizontal 1/4 setting, set total width to 5760.

 

Step 4: Set total width to 1440.

 

Step 5: Set the first display width to 1344.

 

Step 6: Set the second display width to 1536.

 

Step 7: Set the third display width to 1536.

 

Step 8: Confirmed to SAVE TO PORT finish split setting.

 

There is no need to set the fourth display, the device will calculate itself.

 

Preview Split

Horizontal 1:1

 

If the user has two displays, the left display is 1792*960, the right display is 1536*960, which needs display split to 3328*960 and preview and take out.

 

Operation steps:

Step 1:

Choose Split Mode: Press Menu button, enter into two port split by knob and select Horizontal 1/2 mode.

 

 

Step 2:

Choose the output resolution.( if any display is lower than 1920*1080, there is no need to operate this step). The left display is 1792*960; the right display is 1536*960. Any display width and height is no more than 1080, so the user doesn’t need to setup the output resolution.

 

 

Step 3:

After Horizontal 1/2, set total width to 3328 

 

Step 4:

Set the total height to 960.

 

Step 5:

Rotate to the next page, set the first display with to 1728.

 

Step 6:

Confirmed to SAVE TO PORT to finish split setting.

 

 

There is no need to set the Second display, the device will calculate itself.

 

 

Vertical 1:1

If the user has two displays, top display is 1792*1152, the bottom display is 1792*960, it needs display split to 1792*2112 and preview setting and take out.

 

Operation steps:

Step 1:

Choose Split Mode: Press Menu button, enter into two port split by knob and select 1/2 vertical mode. 

Step 2:

Choose the output resolution.( if any display is lower than 1920*1080, there is no need to operate this step). The top display is 1792*1152; the bottom display is 1792*960. The top display height is more than 1080, so the user needs to setup the output resolution to 2048*1152*60HZ. (The steps is details, please review to output resolution page).

 

Step 3:

After Vertical 1/2, set total width to 1792

  

Step 4:

Set the total height to 2112.

 

Step 5:

Set the first display height to 1152 (the top display is viewed as the first display)

 

Step 6:

Confirmed to SAVE TO PORT to finish split setting.

 

There is no need to set the Second display, the device will calculate itself.

 

 

 

Individual output

In the individual output working made

4 outputs on VXP4K could control 4 different screens separately, any of the four pictures could be adjusted individually, including the source signal, picture size etc.

 

EG. 4 screens of different size 2880*384, 2560*576, 2304*768, 1024*768, how to make them to display different pictures or the same picture.

 

a. Press MENU button, turn the knob to find the individual output, enable this function.

 

b. Set resolution according to the widest and highest screen, the widest is 2880 and highest 768, so it should be 2880*768@60.

 

c. Select the source signal of each output, select DVI as source signal for 4 ports, the outputs port DVI1/2/3/4 are layer ABCD separately.

Press layer A and choose DVI to change the source signal for DVI1 into DVI, it is the same way to change source signals for layer BCD.

 

 

d. After source signal changed, adjust the size of the ABCD layers into 2880*384, 2560*576, 2304*768, 1024*768

Note! Size adjustments would not be valid until all parameters saved to the port. 

 

e. Press SAVE to save all above settings to saving mode 1, now the four screens are showing the same picture.

f. Change source signal for layer ABCD separately, (find how to do it in “c.”), save it to saving mode 2, the four screens are displaying 4 different pictures.

 

g. By loading saving mode 1 / 2 could easily switching the four screen to display four same picture or four different ones

 

EDID Management

One display 3072*1536 needs pixel to pixel effect. How to set if the computer only has the resolution 3840*2160 but not 3072*1536? The answer is EDID management.

Operating steps:

Press Menu Button, and enter into EDID Management by knob.

 

Press EDID input interface by knob (The adjustable interface can be revised). Now we take HDMI2.0 for an example to revise input interface EDID.

 

 

Select HDMI2.0 interface and enter,

The user can choose standard HDMI2.0(4K60HZ) HDMI1.4(4K30HZ) Or HDMI1.3(2K) if the resolution is standard. But the user needs to customize EDID for the example, so choose CUSTOM.

 

 

When entering into CUSTOM, press the numbers 3072, 1536 and 60 to finish the EDID setting.

 

After that, the user checks back to the home page ( Some computers take effects after reconnection the cables).

 

System Setting

Output Brightness：Adjust output brightness0-255 steps by knob.

Output interface select: Use to copy the output setting.

Foe example: DVI2 output of the device is broken. If wanting to split by 3 output, the user can change DVI4 into DVI2 setting.

 

Factory Reset: Reset to its factory setting

System information：Use can view the device version

 

Language：This device supports Chinese and English.

1. Chúng tôi sẽ giao hàng miễn phí trong Tp. Buôn Ma Thuột và những nơi khác xin vui lòng liên hệ. Thông thường chúng tôi giao hàng bằng chuyển fax nhanh với những công ty uy tín như VIETTEL, VNPT, NEWPOST...

2. Hàng hóa được giao sau khi thanh toán được xác nhận.
3. Chúng tôi không chịu trách nhiệm cho bất kỳ tai nạn, sự chậm trễ hoặc các vấn đề khác là trách nhiệm của dịch vụ vận chuyển.

4. Khách hàng vui lòng kiểm tra hàng hóa : số lượng, chủng loại, hư hỏng,...

 

Quý khách có thể thanh toán bằng cách chuyển khoản cho chúng tôi theo thông tin dưới đây:

Tên tài khoản: Nguyễn Duy Dũng

Số tài khoản: 0231000538941 tại Ngân hàng Vietcombank chi nhánh Đắk Lắk

 

Khi chuyển khoản, Quý khách vui lòng ghi rõ Tên, số điện thoại, Tên ngân hàng và số tiền chuyển khoản trong email hoặc tin nhắn và gửi lại cho Viettin (email: ledhalinh@gmail.com - sales@ledhalinh.vn, – hotline: 0909 529 799), sau khi xác nhận giao dịch thành công, chúng tôi sẽ thông báo đến quý khách thời gian giao hàng.

1. Nếu hàng hoá bị khiếm khuyết, xin vui lòng thông báo cho chúng tôi trong vòng 3 ngày kể từ ngày giao hàng. Chúng sẽ chấp nhận đổi lại sản phẩm khác hoặc hoàn lại tiền cho quý khách. Hàng trả lại sau 7 ngày kể từ ngày giao hàng chúng tôi chỉ bảo hành, sửa chữa (trừ những trường hợp đặc biệt thỏa thuận giửa hai bên).
2. Tất cả hàng trả lại phải còn đầy đủ bao bì, phụ kiện như ban đầu. sửa chữa hoặc thay đổi các hạng mục sẽ không chấp nhận cho trả lại/hoàn lại tiền.

3. Sản phẩm được bảo hành theo thời hạn bảo hành ghi trên sản phẩm.

4. Chúng tôi  bảo hành chỉ bao gồm bản thân sản phẩm không bảo hành sản phẩm liên quan.

5. Chúng tôi sẽ không bảo hành các sản phẩm bị hư hỏng do sử dụng không đúng cách,do côn trùng ,chuột, dán, hoặc cài đặt bị lỗi.
6. Người mua chịu trách nhiệm cho tất cả chi phí vận chuyển phát sinh.